392 Circular Chart Recorder
The 392 circular chart recorder is a user configurable 1, 2, 3 or 4 pen, continual trace, 100mm calibrated width circular chart instrument. Current status information is presented on a front panel mounted, high visibility, vacuum fluorescent display.
- Single chart view of selected recording period
- Controller and programmer
- Universal input channels
- Up to 4 pens
- IP65 panel sealing option
- Compact design for convenient location
The modular construction and compact design ensure that is convenient to locate, while being easy to maintain and upgrade.
Use of the integral keypad, and the structured parameter list allows for fast basic set-up and selection of those functions needed for a particular application. Configuration parameters are protected by a user definable password.
The measured value for each channel is displayed along with, the channel number, engineering units, channel Descriptor and alarm information.
The model 392 offers two PID controllers with features such as cascade, ratio/bias, feedforward and internal setpoint generation. Dedicated auto/manual and remote/local setpoint keypads allow the user to switch between one control function to the other.
Addition of the maths function allows for calculations ranging from simple add, subtract through to the more complex, Mass flow and Relative humidity.
This features allows for a user defined input, such as a Pirani Vacuum Gauge to be entered and selected for tracing on the recorder.
The 392 can be provided with up to 4 integrating/totalising channels, with nine-digit resolution, for flow and power applications. Each totaliser channel is capable of driving a relay output, for example to drive an electromechanical counter.
Up to four alarms can be configured per channel. Each alarm can be configured as absolute low/high, deviation, or rate of change.
Up to 8 relay outputs can be fitted, driven by any internal recorder event such as channel alarm, totaliser overflow, totaliser output.