Product Description
The Vaisala DRYCAP® Dewpoint Transmitter DMT152 is designed for measuring low dew point in OEM applications, even down to -80°C.
- Compact and accurate
- Vaisala DRYCAP® technology with a polymer sensor
- Measures dew point down to -80°C (-112 °F)
- Reduced maintenance costs due to long calibration interval
- Fast response time
- Withstands condensation
- NIST traceable
- Compatible with the Vaisala MI70 indicator
- Optional loop powered display, Nokeval 301
Low Maintenance The DMT152 mechanics have been designed for harsh environments requiring protection against dust, dirt, and splashed water. The DRYCAP® technology has a low maintenance need due to its excellent long-term stability and durability against condensation.
Applications The DMT152 is an ideal choice for industrial applications where it is necessary to control very low humidity. Most typical areas of use are air and plastics dryers, dry chambers, pure gases, and highvoltage circuit breakers. The DMT152 measures accurately and reliably also in the challenging combination of low humidity and hot air, which is typical in plastics drying.
General Sensor Vaisala DRYCAP® 180U Thin-film capacitive polymer sensor Recommended calibration interval 2 years Operating voltage with RS485 output 11* … 28 VDC voltage output 15* … 28 VDC current output 21 … 28 VDC *For extended temp. down to -40 °C (-40 °F) or pressure up to 50 bar (725 psia), the supply voltage is 21 … 28 VDC. Supply current normal measurement 20 mA + load current during self-diagnostics max. 220 mA pulsed Supply voltage fluctuation max. 0.3 V External load for voltage output min. 10 kOhm current output max. 500 Ohm Housing material (wetted parts) AISI316L Stainless steel mesh filter Filter body AISI303, mesh AISI316L, grade 18 μm Mechanical connections ISO G½”, NPT ½”, UNF 3/4”- 16” Housing classification IP65 (NEMA 4) Storage temperature range -40 … +80 °C (-40 … +176 °F) Weight (ISO G½”) 190 g (6.70 oz) Complies with EMC standard EN61326-1, Electrical equipment for measurement control and laboratory use – EMC requirements; Industrial environment
